Jet Performance Products... Plug Into Performance!
JET Performance Products are developed at a state of the art facility in Huntington Beach, California using the latest Dynamometer Techniques and computer monitoring equipment to insure all JET chip and module is tuned for the maximum torque and horsepower gains throughout the RPM band.
The programming changes each JET chip is extensive including modified spark advance tables, air fuel ratio modification, torque converter lockup (in automatics), shift improvement in electronic automatic transmission and various other parameters to optimize the torque and horsepower curve for each individual application. Chassis Dynamometer tuning allows JET to develop a specific program for each application.
Rigorous Testing
Every vehicle is first tested in a stock configuration to get baseline dynamometer and track times. To do this the vehicle is connected to JET's custom data acquisition system to monitor various sensors. These includee Engine temperature, spark advance and air/fuel ratios, all of this data is then recorded and stored away for later comparison.
From there Jet Performance start to modify the spark advance and fuel curve in 500 rpm increments until we achieve the maximum torque and horsepower at the drive wheels in each rpm and load range. This allows turning under all types driving conditions and not just wide open throttle. This is a decisive advantage to the JET chip!
All the Data is stored on disk and transferred to the JET chip program so thorough track and street testing can be done under "real world driving conditions" to assure the Dyno results prove guaranteed decreases in 0-60 mph accelearation time and quicker ΒΌ miles acceleration.
Jet Performance products are available for both Diesel and Gasoline Engines. As our name implage, we specialize in Diesal Performance products and Dieself-Performance-Direct. We do however offer Jet Performance products for sport vehicles as well! Shop around for the best prices you can find!